If you have previously registered, but forgotten your password, click here.

T O P I C     R E V I E W
Mike Downey	looking to replace fuel pump around Des Moines. thanks
padroo	First you will need a fuel pump. Here is the link to Tom Mills site. http://www.plymouthprowlerparts.com/ Are you going to change it or have it done.
Mike Downey	don't know if I will attemt it myself or have it done, Looked at video from john in Denver. fuel dripping on floor when car is running. any idea of labor cost to hire it done
WildCat	quote: Originally posted by Mike Downey: don't know if I will attemt it myself or have it done, Looked at video from john in Denver. fuel dripping on floor when car is running. any idea of labor cost to hire it done I changed mine 16-17 years ago Not hard to do & most DIY people can follow the instructions & do in hour or so. If you’re not comfortable doing it then find someone who is. While changing should check all rubber lines to insure they are still in good condition Should be plenty of info here on changing the fuel pump ------------------ Larry Mayes
ALLEY CAT	Hi Mike,,,, retired by now? Been a long time since we chatted.. . Check this link > http://www.bing.com/search?q=Best+auto+repair+shops+in+Des+Moines+Iowa+&form=MSNSB1&refig=8635b6ee72064ac6bfeb861b82796511&mkt=en-us&ocid=iehp . . Pick some to call and ask if they are familiar with replacing the fuel pump in Chrysler products....maybe a Prowler or Viper to see if they have worked on these types of cars. But first, do as WC said,,,check for a hose leak instead of a fuel pump problems. Good luck,,, AC ------------------
Mike Downey	Larry I retired 15 years ago. Living in Iowa still but now in Des Moines suburb. will check fuel hoses first Good to hear you are still going strong ------------------ ceramic brakes, front and rear mud flaps, tranny cover, rear bumper shimmers, engine dress up kit
HelRaiZer	Fuel Pump Replacement Video
Tom Mills	quote: Originally posted by HelRaiZer: Fuel Pump Replacement Video This video is an example of making a simple job into night mare. A lot of un necessary work. We have a complete pump assembly that is a simple drop in replacement. Basically remove the pump retainer ring and disconnect the fuel lines and wiring and pull the pump out and install the new one. They are taking the pump assembly all apart to replace the pump in the canister which is a big job. Email me and I can send you the instructions. jeffersonauto@earthlink.net http://www.plymouthprowlerparts.com/ This message has been edited by Tom Mills on 03-13-2024 at 07:25 PM